Microfilters
Microfiltration SCRUFILTER®
The compact SCRUFILTER® units can be used in many applications of micro-filtration in order to remove fine suspended solids from water down to 20 microns.
The reduction of suspended solids is accompanied by a reduction in COD, BOD5, phosphorus, nitrates and other substances. In the case of further treatment with UV for disinfection it is important to reduce the turbidity caused by suspended solids. Standard filters are produced with frames in ABS and filter cloths in polyester. These can also be produced completely in stainless steel. The filter cloth is selected according to solids removal requirements which can be 20 – 30 – 40 – 60 – 80 or 100 microns. On special request different filter sizes can be produced.
The construction is made of stainless steel AISI 304.
Typical applications
- waste water treatment plants (tertiary treatment, microfiltration),
- water recovery (food industry, textile, paper mill, etc.)
- beverage production plants,
- fish-breeding farms,
- filtration of surface water (river, lake, etc) and well water.
Technical data
|
SCRULFILTER type |
FL03S |
FL06S |
FL06D |
|---|---|---|---|
|
Drum |
1 x 340 mm |
1 x 600 mm |
2 x 600 mm |
|
Flow max* [m3/h] |
15 |
30 |
60 |
|
Drum - power installed [kW] |
0,18 |
,18 |
0,36 |
|
Wash pump - power installed [kW] |
0,45 |
0,75 |
1,10 |
* Max flow is calculated with installed cloth of 40 microns and 100 p.p.m. of suspended solids.
|
SCRULFILTER type |
FL03S |
FL06S |
FL06D |
|---|---|---|---|
|
A |
520 |
780 |
1560 |
|
B |
550 |
920 |
1700 |
|
C |
200 |
200 |
200 |
|
D |
1422 |
2261 |
2261 |
|
E |
1620 |
2633 |
2633 |
|
H |
1200 |
1545 |
1545 |
